The operation of Raymond grinding mill from China SBM
The operation of Raymond grinding mill
Before the Raymond mill is started, check if all the maintenance doors are closed tightly and the gap between jaw plates of the crusher match the particle size of the feeding material, and the rotating speed of the classifier shall be adjusted in conformity of the required fineness of the finished powder. At last, turn on the machine according to the sequence below:
http://www.aconecrusher.com
1. Turn on the dustpan elevator;
2. Turn on the jaw crusher;
3. Turn on the classifier after the hopper is fed with materials;
4. Turn on the blower (It starts with no load. You can load when the blower runs normally);
5. Turn on the main frame. And immediately after that, turn on the electromagnetic vibrating feeder. Then the powder grinding is started.
The sequence of operation is outlined as follows: Start, elevator→crusher→classifier→blower→main frame→feeder,
http://www.grindercrusher.com
Turn off the machine in the following sequence:
1. Turn off the feeder and stop feeding materials;
2. Turn off the main frame in one machine;
3. Turn off the blower after blowing off all the residual particles;
4. Turn off the classifier finally.
The sequence of turning off the machine is outlined as follows: Feeder→main frame→blower →classifier.
Note: The material is transported to the hopper by an elevator. When the material in the hopper reaches a certain quantity, stop the crusher first and then the elevator. This operation depends on the quantity of the stored material
5. In order to guarantee the production safety, the Raymond mill must not be lubricated under the normal operation. If any part of the machines generates abnormal noises, or the load is suddenly raised up, turn off the machine immediately for checking and troubleshooting to prevent serious accidents. Before restarting the machine, take out the residual material first. Otherwise, the current will become so strong as to affect the startup operation.
# # #
Shanghai Shibang is not only the leading company in the domestic market,but also one of the largest companies exporting grinding and crushing equipment to the overseas markets.We offer you grinding mill and crushers!
| Contact us at : | |
| Issued By: | shanghaisbm |
| Email: | test@gmail.com |
| Country: | China |
| WebSite: | http://prlog.org/10476314 |
| Categories: | Art & Entertainment, Environment, Government, Paid |
| Tags: | raymond mill |
You can leave a response, or trackback from your own site.
RSS